Configuration Descriptor -īDescriptorType : 0x02 (Configuration Descriptor)īConfigurationValue : 0x01 (Configuration 1) IManufacturer : 0x01 (String Descriptor 1) IdVendor : 0x10C4 (Silicon Laboratories, Inc.) Device Descriptor -īDescriptorType : 0x01 (Device Descriptor)īDeviceClass : 0x00 (defined by the interface descriptors) Connection Information V2 -ĭevIsOpAtSsOrHigher : 0 (Is not operating at SuperSpeed or higher)ĭevIsSsCapOrHigher : 0 (Is not SuperSpeed capable or higher)ĭevIsOpAtSsPlusOrHigher : 0 (Is not operating at SuperSpeedPlus or higher)ĭevIsSsPlusCapOrHigher : 0 (Is not SuperSpeedPlus capable or higher)ĭata (HexDump) : 01 00 00 00 10 00 00 00 03 00 00 00 00 00 00 00. Connection Information -Ĭonnection Status : 0x01 (DeviceConnected) Power State : D3 (supported: D0, D3, wake from D0) Status : 0x01806400 (DN_HAS_PROBLEM, DN_DISABLEABLE, DN_REMOVABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER) Output USBview (USB Device Tree): = USB Port1 =Ĭonnection Status : 0x01 (Device is connected)ĬompanionHubSymLnk : USB#ROOT_HUB30#7&10a4fe21&0&0#Ĭapabilities : 0x14 (Removable, UniqueID)
Any ideas of what I can try to get it to work?
So the device VID is 10C4 and the PID is EA60, so I believe I should be able to use the normal drivers.
#SILICON LABS CP210X USB TO UART DRIVERS#
I can get the ESP32 to work on my Ubuntu system, with the drivers that come pre installed with Ubuntu.
#SILICON LABS CP210X USB TO UART WINDOWS#
Reinstalling drivers, rebooting, trying different USB HUBS and cables, trying the windows 7/8 drivers, nothing works. I keep getting “The device cannot start (Code 10)”.
No matter what I try, I cannot get the device to work. The Silabs chip on the device has the following information: I bought a cheap ESP32 dev kit, and installed the CP210x drivers for it (found here: ). Perhaps a bit of topic on this forum, but Silabs cannot help me unfortunately, so I thought let’s give it a try.